Swingarm Stainless steel Gilera Citta

∙ Swing arm.
∙ Stainless steel / Aluminum.
∙ Assemble yourself.
∙ Weight: 4200 Grams.

Complete set with:

∙ Side plates left + right.
∙ 2x Aluminum moutning plates.
∙ Mounting…

Swingarm strengthened Black Gilera Citta

∙ Swing arm.
∙ Strengthened model.
∙ New model.
∙ Black (Small scratches are possible)
∙ Mounting centre stand possible.

Suitable for:

∙ Gilera Citta.

Centre stand Black Complete Gilera Citta

∙ Centrestand.
∙ Including axle & springs.
∙ Black.

Measurements:

∙ Height: 225mm.
∙ Width Bottomside: 135mm.
∙ Width Upperside: 95mm.
∙ Diameter mounting hole:…

Side stand Black Gilera Citta

∙ Sidestand.
∙ Black.

Suitable for:

∙ Gilera Citta.

Side stand Chrome Gilera Citta

∙ Sidestand.
∙ Chrome.

Suitable for:

∙ Gilera Citta.

Spring side stand Galvanized 90mm Puch Maxi / Citta / Ciao

∙ Sidestand spring.
∙ Galvanized.
∙ Length: 90mm.

Suitable for:

∙ Puch Maxi
∙ Gilera Citta.
∙ Vespa Ciao.

Harley bracket Black Gilera Citta

∙ Harleybracket.
∙ Black.

Suitable for:

∙ Gilera Citta.

Rear Carrier Black Gilera Citta

∙ Rear carrier.
∙ Black.

Suitable for:

∙ Gilera Citta.

Identiek aan Piaggio artikel nummer

308027

Rear Carrier White Gilera Citta

∙ Rear carrier.
∙ White.

Suitable for:

∙ Gilera Citta.

Identiek aan Piaggio artikel nummer

308027

Rear carrier Black Gilera Citta

∙ Rear carrier.
∙ Black.

Suitable for:

∙ Gilera Citta.

Identiek aan Piaggio artikel nummer

339744

Mounting set Subframe - Swingarm Gilera Citta

∙ Subframe mountingset.
∙ For mounting the swingarm to the frame.

Complete set with:

∙ Swingarm spacer.
∙ Bolt subframe.
∙ Galvanized Nut.
∙ 2 x Copper bushing.
∙ 2 x…

Mounting spacer Swingarm 10mm x 14mm x 103mm Gilera Citta

∙ Mountingspacer Swingarm.

Measurements:

∙ 10mm x 14mm x 103mm.

Suitable for:

∙ Gilera Citta.

Pedal crank shaft arm set Chrome Gilera Citta / Vespa

∙ Crank set.
∙ Chrome.
∙ Left and Right turning thread.
∙ Use with 9.5 Woodruffkeys.

Measurements:

∙ Total length: 125mm.
∙ Offset: 40mm.
∙ Key hole:…

Pedal crank shaft arm Right side Chrome Gilera Citta / Vespa

∙ Pedal crank shaft arm.
∙ Right side.
∙ Chrome.
∙ Use with 9.5 Woodruffkeys.

Measurements:

∙ Total length: 125mm.
∙ Offset: 40mm.
∙ Key hole:…

Pedal crank shaft arm Left side Chrome Gilera Citta / Vespa

∙ Pedal crank shaft arm.
∙ Left side.
∙ Chrome.
∙ Use with 9.5 Woodruffkeys.

Measurements:

∙ Total length: 125mm.
∙ Offset: 40mm.
∙ Key hole:…

Key kickstart / pedals 9.5mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.5mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.5mm.
∙ Length:…

Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.0mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.0mm.
∙ Length:…

Footrests set Aluminium Gilera Citta / Vespa Ciao / SI / Bravo

∙ Footrests set / Footsteps set.
∙ Aluminium.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa SI.
∙ Vespa Bravo.

Footrests set model as Buzzetti Black Gilera Citta / Vespa Ciao

∙ Footrests set / Footsteps set.
∙ Model as Buzzeti.
∙ Black.

Measurements:

∙ Total length: 104mm.
∙ Length rubber: 74mm.
∙ Diameter thread:…

Footrests set X-Treme Black Gilera Citta / Vespa Ciao

∙ Footrests set / Footsteps set.
∙ X-Treme model.
∙ Black.

Measurements:

∙ Total length: 108mm.
∙ Length rubber: 74mm.
∙ Diameter thread: 16mm.

Suitable…

Footrests set Short - Narrow model Black Gilera Citta / Vespa Ciao

∙ Footrests set / Footsteps set.
∙ Short - narrow model.
∙ Black.

Measurements:

∙ Total length: 102mm.
∙ Length rubber: 73mm.
∙ Diameter rubber:…

Footrests set Metal Twist Gilera Citta / Vespa Ciao / SI

∙ Footrests set / Footsteps set.
∙ Metal twist.
∙ Chrome.
∙ 2 Pieces.

Measurements:

∙ Length: 134mm.
∙ Width: 42mm.
∙ Diameter hole for axle:…

Footrests rubber set Black Gilera Citta

∙ Footrest rubber.
∙ Black.
∙ Fits on the X-Treme & the Buzzetti Footrests.
∙ 2 Pieces.

Suitable for:

∙ Gilera Citta.

Footrests rubber set 90mm - 16mm Black Gilera Citta

∙ Footrests rubbers.
∙ Black.
∙ Fits on the X-Treme & the Buzzetti Footrests.
∙ 2 Pieces.

Measurements:

∙ Length: 90mm.
∙ Innerdiameter: 16mm.

Suitable for:

∙ Gilera Citta.

Fuel cap with Lock Gilera Citta / Vespa SI / Bravo / Etc

∙ Fuelcap.
∙ With Lock.
∙ 2-Pieces.

Complete set with:

∙ Fuel cap.
∙ Mountingring (Diameter: 49mm - 33mm)
∙ 2 Keys.
∙ Various mounting bolts.
∙ Allen…

Fuel cap with Lock Black Gilera Citta

∙ Fuel cap with Lock.
∙ Black.
∙ Including 2 Keys.

Measurements:

∙ Total length: 80mm.
∙ Length inner part: 54mm.
∙ Diameter inner part: 31mm.
∙ Diameter inner part rubber:…

Fuel cap Standard Black Gilera Citta / Vespa Ciao

∙ Fuel cap.
∙ Standard model.
∙ Black.

Measurements:

∙ Total length: 270mm.
∙ Diameter inner part: 30mm.
∙ Diameter inner part rubber: 33mm.

Suitable for:

∙…

Tank cap Ribbed - Aluminium Gilera Citta / Vespa CIao

∙ Tankcap.
∙ Aluminium / Ribbed.
∙ Good polishable.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao

Tank cap Round - Aluminium Gilera Citta / Vespa CIao

∙ Tankcap.
∙ Aluminium / Round.
∙ Good polishable.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao

Handlebar Lock 2 Keys Gilera Citta

∙ Handlebar Lock.
∙ Including 2 keys.

Suitable for:

∙ Gilera Citta.

Petrol Tap M12 x 1.00 Gilera Citta

∙ Fuel cock.
∙ 3 Positions: Open , Reserve , Closed.

Measurements:

∙ Connection tank: M12 x 1.00.
∙ Connection hose: 6mm.
∙ Pass: 3mm.

Suitable for:

∙ Gilera Citta.

Petrol Tap OMG A-Qaulity! M12 x 1.00 Gilera Citta

∙ Fuel cock.
∙ OMG, A-Qaulity!
∙ 3 Positions: Open , Reserve , Closed.

Measurements:

∙ Connection tank: M12 x 1.00.
∙ Connection hose: 5 / 6mm.
∙ Pass:…

Bolt Subframe M10 X 120mm Gilera Citta

∙ Bolt Subframe.
∙ M10 x 120mm.

Suitable for:

∙ Gilera Citta.

Bolts set Stainless steel Gilera Citta

∙ Bolts set.
∙ Stainless steel.
∙ Contains mainly the bolts that are in sight.

Complete set with:

∙ Mounting brake handles on the handlebars.
∙ Mounting handlebars cover.
∙…

Air bleed nipple Frame Gilera Citta

∙ Air bleed nipple for the back of the frame.

Suitable for:

∙ Gilera Citta.

Bush Crankshaft Nylon Gilera Citta / Vespa SI / Grillo

∙ Crankshaft Bush Nylon.
∙ A Piece.

Measurements:

∙ Inner diameter: 16mm.
∙ Outer diameter: 25.5mm.
∙ Length: 15.5mm.

Suitable for:

∙ Gilera Citta.
∙ Vespa…

Filler ring Crankshaft Gilera Citta / Vespa Ciao / SI / Bravo

∙ Fillerring Crankshaft.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa SI.
∙ Vespa Bravo.

Copper bushing Frame Gilera Citta

∙ Copper bushing in Frame.
∙ A Piece.

Suitable for:

∙ Gilera Citta.

Dust ring subframe Gilera Citta / Vespa CIao

∙ Dust ring subframe.
∙ Rubber.
∙ A Piece.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.

Identical to Piaggio article number

122672

O-Ring Fuel cap with Lock Gilera Citta / Vespa Ciao

∙ O-Ring.
∙ Rubber.
∙ For Fuelcap with Lock.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.

O-Ring Fuel cap aluminium Gilera Citta / Vespa Ciao

∙ O-Ring.
∙ Rubber.
∙ For aluminium Fuelcap.
∙ A Piece.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.

Locking clip Centre stand Gilera Citta / Vespa CIao / SI

∙ Lockingclip Centrestand.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa SI.

Cap harleybracket Black Gilera Citta

∙ Cap harley bracket.
∙ Black.
∙ A Piece.

Suitable for:

∙ Gilera Citta.

Cap Rear carrier Black Gilera Citta

∙ Cap Rear carrier.
∙ Only for the Original Rear carriers.
∙ A Piece.

Suitable for:

∙ Gilera Citta.

Chain tensioner Piaggio Boxer

∙ Chain tensioner.

Suitable for:

∙ Paiggio Boxer.

Speedometer 48mm 60Km/h Black Gilera Citta / Vespa Ciao / SI

∙ Kilometerteller.
∙ Build-in diameter 48mm
∙ Black dial.
∙ Reach 0>60Km/h.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa SI.

Cover Cap set Black Complete 24-Pieces Gilera Citta

∙ Covercapset.
∙ Complete set.
∙ Black.
∙ 24 Pieces.

Complete set for:

∙ 4 x Shock absorbers.
∙ 2 x Front Wheel.
∙ 4 x Fork Plate.
∙ 2 x Handleset.
∙ 4 x…

Bearing Plate Rear Wheel Bare Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Bare, without bearing.

Suitable for:

∙ Gilera Citta.
∙ Piaggio / Vespa Ciao.
∙ Piaggio / Vespa…

Bearing Plate Rear Wheel Complete Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Complete with bearing.

Suitable for:

∙ Gilera Citta.
∙ Piaggio / Vespa Ciao.
∙ Piaggio / Vespa…

Bearing Plate Rear Wheel Aluminium Strenghtened! Blank Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Blank model.
∙ Complete with bearing.

Suitable…

Bearing Plate Rear Wheel Aluminium Strenghtened! Blue Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Anodised blue.
∙ Complete with bearing.

Suitable…

Bearing Plate Rear Wheel Aluminium Racing Green Swiing Top-Qaulity! Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Anodised blue.
∙ Complete with…

Bearing Plate Rear Wheel Aluminium Racing Orange Swiing Top-Qaulity! Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Anodised orange.
∙ Complete with…

Bearing Plate Rear Wheel Aluminium Racing Black Swiing Top-Qaulity! Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Anodised black.
∙ Complete with…

Bearing Plate Rear Wheel Aluminium Racing Blue Swiing Top-Qaulity! Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Anodised blue.
∙ Complete with…

Bearing Plate Rear Wheel Aluminium Racing Red Swiing Top-Qaulity! Gilera Citta / Vespa Ciao / SI / Bravo / Boxer

∙ Rear wheel bearing plate / flange.
∙ Aluminium / Strenghtened!
∙ Anodised red.
∙ Complete with…

Chain tensioner Automatic Gilera Citta / Vespa SI

∙ Chaintensioner automatic.
∙ For kick chain.

Suitable for:

∙ Gilera Citta.
∙ Vespa SI.

Stop Rubber Centre stand Gilera Citta

∙ Stop rubber centerstand / centrestand.
∙ A Piece.

Suitable for:

∙ Gilera Citta.

Identical to Piaggio article number

214491

Guide Choke Rod Swingarm Gilera Citta

∙ Choke rod guide.
∙ For on the swingarm.
∙ Black.
∙ Mounting screw included.

Suitable for:

∙ Gilera Citta.

Footrest Rubber set Buzzetti Black Gilera Citta / Vespa Ciao / SI / Bravo

∙ Footrest replacement rubber set.
∙ Black.
∙ 3D Printed.
∙ Fits on Buzzetti footrests.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa…

Footrest Rubber set Buzzetti White Gilera Citta / Vespa Ciao / SI / Bravo

∙ Footrest replacement rubber set.
∙ White.
∙ 3D Printed.
∙ Fits on Buzzetti footrests.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa…

Centerstand set Black Complete Vespa SI

∙ Centrestand set.
∙ Axle and springs included.
∙ Black.

Measurements:

∙ Height: 230mm.
∙ Width bottom side: 160mm.
∙ Width top side: 90mm.
∙ Length axle: 103mm.
∙ Length…

Spring Centre stand 1st Series Vespa Ciao

∙ Spring centerstand / centrestand.

Measurements:

∙ Length: 71mm.
∙ Diameter: 14mm.

Suitable for:

∙ Vespa Ciao (1st Series)

Bushing Crank axle Vespa SI / Bravo / Grillo

∙ Bushing crank shaft.

Suitable for:

∙ Vespa SI.
∙ Vespa Bravo.
∙ Vespa Grillo.

Filler ring Crankshaft Gilera Citta / Vespa Ciao / SI / Bravo

∙ Fillerring Crankshaft.

Suitable for:

∙ Gilera Citta.
∙ Vespa Ciao.
∙ Vespa SI.
∙ Vespa Bravo.

Side stand Black Vespa Ciao

∙ Sidestand.
∙ Black.

Suitable for:

∙ Vespa Ciao.

Side stand Black - Chrome Vespa Ciao

∙ Sidestand.
∙ Black - Chrome.

Suitable for:

∙ Vespa Ciao.

Side stand Twist - Chrome Vespa Ciao

∙ Sidestand.
∙ Twist - Chrome.

Measurements:

∙ Length leg: 200mm.

Suitable for:

∙ Vespa Ciao.

Spring set Centre stand 2-Pieces Vespa SI

∙ Spring set centrestand / centerstand.
∙ 2 Pieces.

Suitable for:

∙ Vespa SI.

Support set Rear Carrier Black Vespa Ciao

∙ Supportset rear carrier.
∙ Black.

Measurements:

∙ Length: 32cm.

Suitable for:

∙ Vespa Ciao (Does not fit the Ciao MIX models)

Support set Rear Carrier Chrome Vespa Ciao

∙ Supportset rear carrier.
∙ Chrome.

Measurements:

∙ Length: 32cm.

Suitable for:

∙ Vespa Ciao (Does not fit the Ciao MIX models)

Mounting set Centre stand Vespa Ciao

∙ Mountingset centrestand / centerstand.

Complete set with:

∙ Bushing ( 114mm x 14mm )
∙ 2 x Springs.
∙ 2 x Clips.

Suitable for:

∙ Vespa Ciao.

Pin Centre stand 92mm x 10mm Vespa Ciao

∙ Pin centrestand / centrerstand.

Complete set with:

∙ Length: 92mm.
∙ Diameter: 10mm.

Suitable for:

∙ Vespa Ciao.

Bushing Rear Carrier Plastic Vespa Ciao

∙ Bushing rear carrier.
∙ Plastic.
∙ A Piece.

Suitable for:

∙ Vespa Ciao.

Identical Piaggio article number

135253

Chain Tensioner Vespa Ciao

∙ Chaintensioner.

Suitable for:

∙ Vespa Ciao (Not for the Ciao MIX model)

Chain Tensioner Vespa Ciao MIX

∙ Chaintensioner.

Suitable for:

∙ Vespa Ciao MIX.

Chain Tensioner Vespa SI

∙ Chaintensioner.

Suitable for:

∙ Vespa SI.

Holder Horn Black Vespa Ciao

∙ Claxon holder.
∙ Black.

Suitable for:

∙ Vespa Ciao.

Tank Cap Round Aluminium Black 66Heroes Vespa Ciao / SI

∙ Tankcap / Fuel cap.
∙ Round.
∙ Aluminium.
∙ Black anodised.
∙ Seal with O-Rings.
∙ A small hole for ventilation prevents the formation of negative pressure in…

Tank Cap Round - Ribbed Aluminium Black 66Heroes Vespa Ciao / SI

∙ Tankcap / Fuel cap.
∙ Round - Ribbed.
∙ Aluminium.
∙ Black anodised.
∙ Seal with O-Rings.
∙ A small hole for ventilation prevents the formation of…