Race Crank Case ADDY 50-1A Push-Start Puch Maxi e50

∙ Race crank case.
∙ ADDY 50-1A Model.
∙ Push/Pedal start version.
∙ The first crank case with many advantages for racing have been implemented
∙ Also suitable for…

VDMRacing Bearing Bush Clutch bell Top-Qaulity! Puch e50

∙ Bearing bush.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.​
∙ Top-Qaulity!
∙ VDMRacing!

Suitable for:

∙ Puch Maxi e50…

Bearing Bush Brass Clutch bell Puch e50

∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.​
∙ Picture 2 is a example picture of the bearing bush in a clutch…

Pullstarter set Black Left turning Original Ignition VDMRacing Puch ZA50 / Z50

∙ Pullstarter set.
∙ Left turning!
∙ Fits together with a original Bosch/Ducati Puch ignition.
∙ Only at VDMPuchParts!
∙ Top-Qaulity! can be…

Pullstarter set Plug & Play Black / Black VDMRacing Puch e50

∙ Pullstart set.
∙ Available for all ignition models! (Make your choice)
∙ Complete set!
∙ Easy to assemble! Plug & Play!
∙ Steel sprocket.
∙ Steel…

Pullstarter set Plug & Play Chrome / Black VDMRacing Puch e50

∙ Pullstart set.
∙ Available for all ignition models! (Make your choice)
∙ Complete set!
∙ Easy to assemble! Plug & Play!
∙ Steel sprocket.
∙ Steel…

Pullstarter set Plug & Play Chrome / Grey VDMRacing Puch e50

∙ Pullstart set.
∙ Available for all ignition models! (Make your choice)
∙ Complete set!
∙ Easy to assemble! Plug & Play!
∙ Steel sprocket.
∙ Steel…

Sprocket Pullstart Original Ignition VDMRacing Puch ZA50 / Z50

∙ Pullstart sprocket.
∙ Aluminium.
∙ Complete wit nut.
∙ Use loctite to secure the flywheel nut!
∙ VDMRacing!

Suitable for:

∙ Puch ZA50 with Original…

Pullstart Sprocket PVL inner rotor Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the PVL Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example photo.

Suitable for:

∙…

Pullstart Sprocket Original Bosch / Ducati Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the Original Bosch / Ducati Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example…

Pullstart Sprocket HPI inner rotor Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the HPI Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example photo.

Suitable for:

∙…

Pullstart Sprocket MVT inner rotor Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the MVT Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example photo.

Suitable for:

∙…

Pullstart Sprocket HPI 2-Ten Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the HPI 2-Ten Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example photo.

Suitable for:

∙…

Pullstart Sprocket Selletra inner rotor Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the Selletra Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example photo.

Suitable…

Pullstart Sprocket Kokusan Ignition VDMRacing Puch e50

∙ Sprocket pullstarter
∙ For the Kokusan Pullstarters from the webshop.
∙ Good Qaulity steel.
∙ VDMRacing!

Note! Photo 3 is a example photo.

Suitable for:

∙ Puch…

Sprocket Aluminium Pullstarter Universal / Puch e50

∙ Sprocket pullstarter.
∙ Aluminium.
∙ Replacement part.

Suitable for:

∙ Puch Maxi e50 Pullstarter.
∙ Universal to use on various moped models.

Cord with Handle Pullstarter Universal / Puch e50

∙ Cord pullstarter.
∙ Complete with handle.
∙ Replacement part.

Suitable for:

∙ Puch Maxi e50 Pullstarter.
∙ Universal to use on various moped models.

Cord Holder - Spring Holder Pullstarter Universal / Puch e50

∙ Cordholder - Springholder pullstarter.
∙ Replacement part.

Suitable for:

∙ Puch Maxi e50 Pullstarter.
∙ Universal to use on various moped models.

Spring Pullstarter Universal / Puch e50

∙ Pullstarter spring.
∙ Replacement part.

Suitable for:

∙ Puch Maxi e50 Pullstarter.
∙ Universal to use on various moped models.

Bushing - Spring Pullstarter Universal / Puch e50

∙ Bushing - Spring pullstarter.
∙ Aluminium.
∙ Replacement part.

Suitable for:

∙ Puch Maxi e50 Pullstarter.
∙ Universal to use on various moped models.

VDMRacing Kickstart conversion kit with sprocket chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome…

VDMRacing Kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome conversion…

VDMRacing Conversion plate kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Conversion plate.
∙ With this conversion plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

VDMRacing Clutch bell plate kickstart conversion kit Top-Qaulity! Puch e50

∙ Clutch bell plate.
∙ With this clutchbell plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

VDMRacing Crankshaft nut kickstart conversion kit Top-Qaulity! Puch e50

∙ Crankshaft nut.
∙ With this crankshaft nut you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

Mounting bolt set M6 kickstart conversion set 5-Pieces Puch e50

∙ Mounting bolt set.
∙ Set to assemble a kickstart conversion kit on a Puch e50 engine.
∙ 5-Pieces.

Suitable for:

∙ Puch e50 push-start / pedal-start engine.

Retaining plate Oil seal Ignition side VDMRacing Puch Maxi e50

∙ Seal Retainingplate.
∙ Mounting to the Ignitionside.
∙ Necessary for Racing purposes!
∙ Easy to mount under the ignition base plate.
∙ Stainless…

Main Gear 106 Teeth Complete! Puch e50

∙ Maingear.
∙ 106 Teeth.
∙ Complete with bearings, seal, snapring and circlips!
∙ This gear is placed in a Puch e50 engine.
∙ To use with a 21 Teeth clutch bell.
∙ Original Puch…

Main Gear 96 Teeth Complete! Puch e50

∙ Maingear.
∙ 96 Teeth.
∙ Complete with bearings, seal, snapring and circlips!
∙ This gear is placed in a Puch e50 engine.
∙ To use with a 19 Teeth clutch bell.
∙ Original Puch…

Primary Axle 3 Gears Puch MV / MS / VS / DS / VZ / Etc

∙ Primary axle.
∙ 3 Gears.
∙ Complete with Sprockets.
∙ Ratio: 11-17-19.

Suitable for:

∙ Puch MV50.
∙ Puch VZ50.
∙ Puch MS50.
∙ Puch VS50.
∙ Puch…

Barrel bearing set 28 x 19.4 x 7.5mm Puch 2 / 3 / 4 Gears

∙ Barrel bearingset.
∙ 3-Pieces.

Complete set with:

∙ 1x Outer ring 28 x 19.4 x 7.5mm.
∙ 1x Bearing ring 27.8 x 16 x 1mm.
∙ 14x Barrel bearing 3.5 x…

Bolts set Engine mounting Complete Puch Maxi / Z-one / Manet / Korado / Etc

∙ Mounting set / Bolt set enginemounting.
∙ Complete set to mount the engine to the frame.

Complete set with:

∙ 3x Mounting Bolt.
∙ 3x Mounting…

Cylinder Mounting set M7 > M6 3D Nuts Perfect fitment VDMRacing Top-Qaulity! Puch Maxi

∙ Stud set.
∙ Perfect fitment.
∙ Top-Qaulity!
∙ Made of High-alloyed Silver steel!
∙ M7 / M6 x 115mm.
∙…

Cylinder Mounting set M6 > M6 3D Nuts Perfect fitment VDMRacing Top-Qaulity! Puch Maxi

∙ Stud set.
∙ Perfect fitment.
∙ Top-Qaulity!
∙ Made of High-alloyed Silver steel!
∙ M6 / M6 x 115mm.
∙…

Cylinder Mounting set M6 3D Nuts 16-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 115mm.
∙ Galvanized.
∙ 16 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw thread Engine side: M6.
∙ Screw thread Cylinderhead…

Cylinder Mounting set M6 3D Nuts 12-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 115mm.
∙ Galvanized.
∙ 12 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw thread Engine side: M6.
∙ Screw thread Cylinderhead…

Cylinder Mounting set 16-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 115mm.
∙ Galvanized.
∙ 16 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw head Engine side: M6.
∙ Screw thread Cylinderhead side:…

Cylinder Mounting set 8-Pieces Puch Maxi

∙ Studs set.
∙ M6 / M6 x 106mm.
∙ Galvanized.
∙ 8 Pieces.

Measurements:

∙ Total length: 106mm.
∙ Screw thread Engine side: M6.
∙ Screw thread Cylinderhead side:…

Stud Crank case / Cylinder 120mm M8 > M6 Universal

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙…

Stud Crank case / Cylinder 116mm M7 > M6 Universal

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ If the screw thread in the engine is broken, you can easily solve this with these adapter studs!
∙…

Stud Crank case / Cylinder 105mm M6 Universal

∙ Stud.
∙ To be used for mounting the cylinder on the engine.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 105mm.

Suitable for:

∙…

Stud Intake / Exhaust 30mm M8 > M6 Universal

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙…

Stud Intake / Exhaust 30mm M8 > M6 Universal

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙…

Stud Intake / Exhaust 30mm M7 > M6 Universal

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ If the screw thread in the cylinder is broken, you can easily solve this with these adapter studs!
∙ Hardened…

Stud Intake / Exhaust 35mm M6 Universal

∙ Stud.
∙ For mounting the intake / exhaust on the cylinder.
∙ Hardened Qaulity!
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 35mm.

Suitable for:

∙ Universal to…

Exhaust / Intake Studs set M6 Puch Maxi

∙ Exhaust / Intake studset.

Complete set with:

∙ 2x M6 Studs.
∙ 2x M6 Flangenut.

Measurements:

∙ Screw thread: M6.
∙ Length: 32mm.

Suitable for:

∙ Puch Maxi Models.

Mounting set Inlet manifold / Cylinder 10mm - 19mm Round M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 19mm inlet manifold with a round inlet on the cylinder.

Complete set…

Mounting set Inlet manifold / Cylinder 10mm - 15mm Round M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 15mm inlet manifold with a round inlet on the cylinder.

Complete set…

Mounting set Inlet manifold / Cylinder 10mm - 15mm Sqaure M6 Puch Maxi

∙ Mountingset / assembly inlet manifold.
∙ Complete set for mounting a 10mm - 15mm inlet manifold with a square inlet on the cylinder.

Complete set…

Mounting set Exhaust / Cylinder 25mm - 28mm Exhaust manifold M6 Puch

∙ Mountingset / assembly set exhaust.
∙ Complete set for mounting a exhaust with a exhaust manifold of 25mm - 28mm on the cylinder.
∙ The set comes with…

Mounting set Exhaust / Cylinder 18mm - 22mm Exhaust manifold M6 Puch

∙ Mountingset / assembly set exhaust.
∙ Complete set for mounting a standard exhaust with a exhaust manifold of 18mm - 22mm on the cylinder.
∙ The set…

Bolt set Crankcase 9-Pieces Puch ZA50

∙ Boltset crankcase.
∙ Slotted model.
∙ 9 Pieces.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Bolt set Engine 17-Pieces Puch ZA50

∙ Boltset engine / Clutch cover.
∙ Slotted model.
∙ 17 Pieces.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Bolt set Clutch cover 8-Pieces Puch ZA50

∙ Boltset Clutch cover.
∙ Slotted model.
∙ 8 Pieces.

Suitable for:

∙ Puch ZA50 2-Speed Automatic.

Oil Fill plug / Drain plug set Puch Maxi e50

∙ Oilfill / Drainplug set.

Complete set with:

∙ 1x Oil fill plug.
∙ 1x Fibre washer Oil fill plug.
∙ 1x Oil Drain plug.
∙ 1x Fibre washer Drain plug.

Suitable for:

∙…

Oil Fill plug Puch Maxi e50

∙ Oilfill plug.
∙ Placed in the clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Oil Drain plug Puch Maxi e50

∙ Oil drainplug.
∙ Placed under the crankcase.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Fibre washer Oil Fill plug Puch Maxi e50

∙ Fibrewasher oil fillplug.
∙ Placed in the clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Fibre washer Oil Drain plug Puch Maxi e50

∙ Fibrewasher oil drainplug.
∙ Placed under the crankcase.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Oil Fill plug Remake Kickstart cover Puch Maxi e50

∙ Olie vul bout.
∙ Suitable for the Remake kickstart clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Oil Fill plug Black Tomos / Puch Z50 / ZA50 / 2V / 3V / 4V

∙ Oil fillplug.
∙ Rubber.
∙ Black.
∙ A Piece.

Suitable for:

2, 3 & 4 Gear Engines.

∙ Puch Maxi Z50.
∙ Puch Maxi ZA50.
∙ Puch MV50.
∙ Puch MS50L.
∙…

Oil Fill plug Grey Tomos / Puch Z50 / ZA50 / 2V / 3V / 4V

∙ Oil fillplug.
∙ Rubber.
∙ Grey.
∙ A Piece.

Suitable for:

2, 3 & 4 Gear Engines.

∙ Puch Maxi Z50.
∙ Puch Maxi ZA50.
∙ Puch MV50.
∙ Puch MS50L.
∙ Puch…

Woodruff Key Puch / Zündapp / Kreidler

∙ Woodruff / Flywheel Key.
∙ A Piece.

Measurements:

∙ Length: 9.66mm.
∙ Height: 3.7mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Models.
∙ Zundapp Models.
∙ Kreidler Models.

Woodruff Key Clutch Puch Maxi e50

∙ Woodruff key Clutch side.
∙ A Piece.

Measurements:

∙ Length: 12.65mm.
∙ Height: 5mm.
∙ Width: 3mm.

Suitable for:

∙ Puch Maxi e50 Models.

Assortiment set Small Material Engine 53-Pieces Puch Maxi e50

∙ Assortimentset engine.
∙ Small material (Various common used parts for Puch Maxi)
∙ 53 Pieces.

Complete set with:

∙ 5x Woodruff key flywheel.
∙ 5x…

Start Mechanism set 3-Pieces Swiing Top-Qaulity! Puch ZA50

∙ Startunit / Start mechanism set.
∙ 3 Pieces.
∙ Swiing, Top-Qaulity!

Complete set with:

∙ Guide nut.
∙ Pull bolt.
∙ Starter cable.

Suitable for:

∙ Puch ZA50 Engines.

Grommet Start mechaniscm / Brake light Switch Puch ZA50

∙ Grommet / Rubber.
∙ For startmechanism, brakelight switch & sparkplug cable.

Measurements:

∙ Length: 45mm.
∙ Diameter: 19mm > 10mm.

Suitable for:

∙ Puch ZA50 Engines.

Gear Half Moon / Kickstart Axle Puch Maxi e50

∙ Kickstartgear / kickstartaxle.
∙ This gear is mounted in the kickstart clutch cover, the kickstartpedal is mounted on this axle.

Note! Photo 3 is a example photo.

Suitable…

Spring Sprocket Kickstart cover Tomos A35 / A55 / Puch Maxi Z50 / e50

∙ Kickstart sprocket / Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover on the outgoing gear.

Note! Photo 2 is a example…

Spring holder Kickstart cover Plastic Puch Maxi e50

∙ Kickstart springholder / kickstartring.
∙ This spring holder is mounted in the kickstart clutch cover. and ensures that the spring remains in position.
∙ Plastic.

Note!…

Spring Kickstart Cover Puch Maxi e50

∙ Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover. and ensures that the kickstart pedal comes back up after starting.

Note! Photo 2 is a example photo.

Suitable…

Shim washer Kickstart Cover 14mm x 10mm x 0.5mm Puch Maxi e50

∙ Shimwasher kickstart clutchcover.
∙ Placed on both Sprockets that fall into the crankcase.
∙ A Piece.

Measurements:

∙ 14mm x 10mm x 0.5mm.

Note! Photo 2…

Kickstart pedal Bended Chrome Puch Maxi e50 / ZA50 / Z50

∙ Kickstartpedal.
∙ Bended model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙ Puch Maxi ZA50 Kickstart Engines.
∙ Puch Maxi Z50 Kickstart…

Kickstart pedal Straight Chrome Puch Maxi e50

∙ Kickstartpedal.
∙ Straight model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.

Kickstart pedal set Straight Black 3-Pieces Puch Maxi e50

∙ Kickstartpedal set.
∙ Straight model.
∙ Black.
∙ 3 Pieces.

Complete set met:

∙ Kickstartpedal Black.
∙ Rubber with Puch print.
∙ Mounting key.

Suitable…

Rubber Kickstart pedal with Puch Print Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Model with Puch print / logo.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable…

Rubber Kickstart pedal Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Black.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙…

Key kickstart / pedals 9.5mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.5mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.5mm.
∙ Length:…

Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.0mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.0mm.
∙ Length:…

Mounting set Kickstart pedal Puch Magnum X

∙ Mountingset kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.