Rubber Flywheel cover Black Puch e50 / ZA50 / Z50

∙ Rubber for flywheel cover / ignition cover.
∙ Black.

Suitable for:

∙ Puch e50 Engines.
∙ Puch ZA50 Engines.
∙ Puch Z50 Engines.

Gasket Flywheel cover Puch e50 / ZA50 / Z50

∙ Gasket / Isolation flywheel cover / ignition cover.

Suitable for:

∙ Puch e50 Engines.
∙ Puch ZA50 Engines.
∙ Puch Z50 Engines.

Wiring Harness Handlebar Switch + Rear Light Ccomplete Puch Maxi

∙ Wire harness complete.
∙ From the engine to the headlight & switch.
∙ From the engine to the taillight.

Pay attention! the wiring harness has no wire for a…

Wiring Harness Complete Puch Maxi P / K

∙ Wiring harness / wire set.
∙ Complete.

Suitable for:

∙ Puch Maxi P / K.

Wiring Harness Handlebar Switch Puch Maxi

∙ Wire harness handlebar.
∙ From the engine to the headlight & switch.

Pay attention! the wiring harness has no wire for a horn.

Suitable for:

∙ Puch Maxi Models.

Wiring Harness Rear Light Complete Puch Maxi

∙ Wire set tailight.
∙ From the engine to the taillight

Complete set with:

∙ Wiring harness.
∙ Mass clamps.
∙ Separate plug for the taillight

Suitable for:

∙ Puch Maxi Models.

Wiring Harness Model with Ignition Lock Puch Monza / Grand Prix / N50

∙ Wiring harness.
∙ Model with ignition lock.

Pay attention! There have been various versions, possibly. adjust the wiring harness yourself.

Suitable…

Wiring Harness Model without Ignition Lock Puch Monza / Grand Prix / N50

∙ Wiring harness.
∙ Model without ignition lock.

Pay attention! There have been various versions, possibly. adjust the wiring harness…

Wiring Harness Model for Flashers Puch Monza / Grand Prix / N50

∙ Wiring harness.
∙ Model for flashers.

Pay attention! There have been various versions, possibly. adjust the wiring harness yourself.

Suitable for:

∙ Puch…

Wiring Harness Model for Flashers Puch Monza / N50

∙ Wiring harness.
∙ Model for flashers.

Pay attention! There have been various versions, possibly. adjust the wiring harness yourself.

Suitable for:

∙ Puch Monza.
∙ Puch N50.

Electric Wire set Wiring Harness 9 x 3 Meter - 1.0mm² Universal

∙ Electric wire.
∙ Total of 9 colors.
∙ every color is 3 meter.
∙ Diameter core 1.0mm².
∙ To use for cable tree wiring various mopeds.

Suitable…

Electric Wire set Taillight - Brakelight Grey - Blue Tomos 2L / 3L / 4L / Puch MV / MS / VS / Etc

∙ Wiring set rear lighting.
∙ Wiring to run through the frame for the rear light - brake light.
∙ Extra stiff wire!
∙…

Ground Cable 130mm Universal

∙ Ground cable.

Measurements:

∙ Length: 130mm.

Suitable for:

∙ Universal to use on various moped models.

Outer Cover Electric Wire 220cm Tomos 2L / 3L / 4L / Puch MV / MS / VS / Etc

∙ Wiring cover.
∙ Galvanized steel.
∙ Wiring cover to pull through the frame to protect the electric wires of, for example, the rear…

Outer Cover Electric Wire 100cm Tomos 2L / 3L / 4L / Puch MV / MS / VS / Etc

∙ Wiring cover.
∙ Wiring cover to pull through the frame to protect the electric wires of, for example, the rear light.
∙ Length: 1…

Spark Plug Short Shaft NGK RACE BR10HIX

∙ Sparkplug.
∙ NGK RACE BR10HIX.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK RACE BR9HIX

∙ Sparkplug.
∙ NGK RACE BR9HIX.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK RACE BR8HIX

∙ Sparkplug.
∙ NGK RACE BR8HIX.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK B10HS

∙ Sparkplug.
∙ NGK B10HS.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK B9HS

∙ Sparkplug.
∙ NGK B9HS.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK B8HS

∙ Sparkplug.
∙ NGK B8HS.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK B7HS

∙ Sparkplug.
∙ NGK B7HS.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK B6HS

∙ Sparkplug.
∙ NGK B6HS.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft NGK B5HS

∙ Sparkplug.
∙ NGK B5HS.
∙ Short shank.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft Bosch W8AC

∙ Sparkplug.
∙ Bosch W8AC (Similar to spark plug NGK B5HS)
∙ Short shaft.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft Bosch W7AC

∙ Sparkplug.
∙ Bosch W7AC (Similar to spark plug NGK B6HS)
∙ Short shaft.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft Bosch W5AC

∙ Sparkplug.
∙ Bosch W5AC (Similar to spark plug NGK B7HS)
∙ Short shaft.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft Bosch W4AC

∙ Sparkplug.
∙ Bosch W4AC (Similar to spark plug NGK B8HS)
∙ Short shaft.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft Bosch W3AC

∙ Sparkplug.
∙ Bosch W3AC (Similar to spark plug NGK B8HS)
∙ Short shaft.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Short Shaft Champion L86C

∙ Spark plug.
∙ Champion L86C.
∙ Short shaft.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Extended Electrode NGK BP6HS

∙ Spark plug.
∙ NGK BP6HS.
∙ Short shaft.
∙ Model with extended electrode.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Extended Electrode & Resistance NGK BP6RHS

∙ Spark plug.
∙ NGK BP6RHS.
∙ Short shaft.
∙ Model with extended electrode & resistance.

Suitable for:

∙ Universal to use on various moped models.

Spark Plug Extended Electrode & Resistance NGK BP8RHS

∙ Spark plug.
∙ NGK BP8RHS.
∙ Short shaft.
∙ Model with extended electrode & resistance.

Suitable for:

∙ Universal to use on various moped models.

Ignition Coil Stefa - Bosch Old Model Puch

∙ Ignition coil.
∙ Suitable for old model Stefa / Bosch ignition.

Measurements:

∙ Total length: 74mm.
∙ Mounting distance holes CtC: 52mm.

Suitable for:

∙ Puch Models from the 50´s

Coil Bracket Stainless steel Universal

∙ Coil bracket.
∙ For mounting the ignition coil.
∙ Stainless steel.

Suitable for:

∙ Universal to use on various moped models.

Revision set Contact points Ignition 5-Pieces Budget Puch Maxi

∙ Revision / Rebuild set.
∙ For contact points ignition.
∙ 5 Pieces.
∙ Budget Qaulity.

Complete set with:

∙ Ignition coil.
∙ Contact points.
∙…

Revision set Contact points Ignition 6-Pieces A-Qaulity Puch Maxi

∙ Revision / Rebuild set.
∙ For contact points ignition.
∙ 6 Pieces.
∙ A-Qaulity.

Complete set with:

∙ Ignition coil.
∙ Flywheel key.
∙ Contact…

Sealing cap Yellow Plug HPI Ignition Universal

∙ Sealing cap yellow.
∙ For HPI plug.
∙ A Piece.

Suitable for:

∙ Universal to use on various moped models.

Cable Connector Isolated Blue M5 A-Quality! Universal

∙ Cable connector.
∙ Isolated.
∙ Blue.
∙ M5.
∙ Top-Quality!
∙ A Piece.

Suitable for cables from:

∙ 1.5mm > 2.5mm².

Suitable for:

∙ Universal to use on…

Stator 90mm HPI inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Stator / Groundplate.
∙ Suitable on all HPI innerrotor ignitions, comes standard with the HPI ignition.

Measurements:

∙ Outer diameter: 100mm.
∙…

Rotor HPI inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Rotor / Flywheel.
∙ Suitable on all HPI innerrotor ignitions, comes standard with the HPI ignition.

Measurements:

∙ Outer diameter: 62mm.
∙ Inner…

Rotor HPI 2-TEN Ignition Puch / Kreidler / Zündapp / Etc

∙ Rotor / Flywheel.
∙ Suitable on all HPI 2-TEN ignitions, comes standard with the HPI ignition.

For this flywheel a flywheel puller M27 x 1mm is…

Groundplate MVT inner rotor Ignition Puch

∙ Groundplate MVT inner rotor ignition.

Suitable for:

∙ Puch Models.

Stator MVT inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Stator MVT inner rotor ignition.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zündapp Models.
∙ Kreidler Models.

Rotor MVT inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Rotor / Flywheel MVT inner rotor ignition.
∙ PREM12 / PREM27.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Models.
∙ Zündapp…

Coil MVT inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Coil MVT inner rotor ignition.
∙ MVT PX20.
∙ PREM01, PREM09, PREM11, PREM12, PREM19, PREM21, PREM27.

Suitable for:

∙ Universal to use on various moped…

CDI Unit MVT Inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ CDI Unit.
∙ For MVT inner rotor ignition (Black model)
∙ MVT RJ05X.
∙ PREM12 / PREM27.

Suitable for:

∙ Universal to use on various moped models.
∙…

Eprom Analog 5 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 4 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 3 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 2 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Eprom Analog 1 MVT inner rotor Ignition Universal

∙ Eprom for Premium MVT and direct digital ignition
∙ Set the ignition at 2.9 mm before top dead center, remove the analog diagram and replace it with the Eprom.
∙ The eprom…

Stator PVL inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Stator / Groundplate PVL inner rotor ignition.
∙ Clockwise & Counterclockwise to use.
∙ Stator 1443-90.
∙ 4000 windings.
∙ 90mm groundplate.
∙ PVL,…

Rotor PVL inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Rotor PVL inner rotor ignition.
∙ Clockwise & Counterclockwise to use.
∙ Rotor 923 Cone 1:5.
∙ 350 Grams.
∙ PVL, Made in Germany.

Suitable for:

∙…

Coil PVL inner rotor Ignition Puch / Kreidler / Zündapp / Etc

∙ Coil PVL inner rotor ignition.
∙ Clockwise & Counterclockwise to use.
∙ 105 458 (458 115)
∙ 036-IG-27.
∙ Plug in typ 2.
∙ PVL, Made in…

Ignition Coil PVL Replica Model Bosch A-Qaulity! Puch Maxi - Turbo Sport

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance: 54mm.
∙ A-Qaulity!

Suitable…

Ignition Coil PVL Replica Model Bosch A-Qaulity! Puch MV / VS / DS / Etc

∙ Ignition coil.
∙ PVL replica coil.
∙ Model as Bosch (Replacement coil as original)
∙ Mounting bolt distance: 54mm.
∙ A-Qaulity!

Suitable…

Rectifier Small AC > DC Universal

∙ Rectifier.
∙ To convert Alternating current (AC) into Direct current (DC)
∙ Universal.
∙ Small model.
∙ Type KBPC3508
∙ Ifsm (Peak current): 400A
∙ Vf (Forward voltage): 1.1V…

Inner rotor Ignition Selettra KZ Race Puch / Kreidler / Zündapp / Etc

∙ Inner rotor ignition.
∙ Ignition is suitable for left- and right turning engines so it also can be used on Z50 and ZA50 engines.
∙ The distance…

Light coil single Wire 12 Volt - 35 Watt Model Bosch Puch / Kreidler / Zündapp / Etc

∙ Lightcoil.
∙ Plug & Play remove the 6 Volt light coil and mount the 12 Volt light coil and you can use 12 volt light bulbs.
∙ Model…

Flywheel Left turning Ignition Model Bosch 4 Gear Puch Monza / Grand Prix / ZV50 / M50 Racing / Etc

∙ Flywheel.
∙ Model Bosch.
∙ Left turning.

Measurements:

∙ Inner diameter cone: 15mm.
∙ Inner diameter: 91mm.
∙…

Plug 3 Pins HPI inner rotor Ignition / Universal

∙ Plug.
∙ Replacement plug für HPI inner rotor ignition.
∙ Also universal.
∙ 3 Pins.​

Suitable for:

∙ Universal to use on various moped models.

Light coil single Wire 12 Volt - 50 Watt Model Bosch Puch / Kreidler / Zündapp / Etc

∙ Lightcoil.
∙ Plug & Play remove the 6 Volt light coil and mount the 12 Volt light coil and you can use 12 volt light bulbs.
∙ Model…

Plug Super Seal 4 Pins Universal

∙ Plug.
∙ 4 Pins.
∙ Waterproof, super seal.​

Suitable for:

∙ Universal to use on various moped models.

Plug Super Seal 3 Pins HPI inner rotor Ignition / Universal

∙ Plug.
∙ Replacement plug für HPI inner rotor ignition.
∙ Also universal.
∙ 3 Pins.
∙ Waterproof, super seal.​

Suitable for:

∙ Universal to use on…

Plug Super Seal 2 Pins Universal

∙ Plug.
∙ 2 Pins.
∙ Waterproof, super seal.​

Suitable for:

∙ Universal to use on various moped models.

Plug Super Seal 1 Pins Universal

∙ Plug.
∙ 1 Pins.
∙ Waterproof, super seal.​

Suitable for:

∙ Universal to use on various moped models.